| Densifier
|
 |
|
|
Polystyrene Densification Systems & EPS Foam Densification Systems
Bright Technologies, has developed a line of EPS Densifiers for volumes from 100 lbs. per hour to 1200 lbs. per hours, producing truckloads of 40,000 lbs. for optimum efficiency. Our equipment is designed, manufactured, installed and serviced factory direct right here in the United States.
Bright Technologies EPS Densifiers are heavy duty "Professional Grade" machines. We built the EPS Densifier inn 1995, is still in service today.
Bright Technologies EPS Densification machines operate with minimum operator attention. The large feed opening on both the D30 EPS Foam Densification Machine and the D120 Densifier help keep the foam moving and minimize bridging in the bag hopper.
Click here to link to our Densifier video website: www.densifiervideo.com
|
 |
Benefits Include:
- Densified EPS Foam truckload weights of 40,000 lbs *
- Up to 300 lbs. per Hour**
- Heavy Duty / Low Maintenance
- Integral Dust Collection Port
- Sealed Design/ Clean Operation
- Ergonomic Block Size
- Two Line Operator Display
|
- Automated Density Control System
- Consistent EPS Discharge
- Does NOT Melt EPS
- Automatic Discharge Shear Option
- Low Labor Requirement
- Low Energy Requirements
- PLC Modem for Remote Support
|
|
Processing Capabilities:
- D30 -- 300+ lbs. per hour
- D120 -- 1,100 to 1300 lbs. per hour
|
Output Density:
- D30 -- 16.5-20 lbs. per cu. ft.
- D120 --16.5-22 lbs. per cu. ft.
|
|
|
|
|
|
Compare to: Baled EPS Foam, Truckload weights of 6,000 lbs*
.
|
|
|
|
|
Compare to: Loose EPS Foam,
Truckload weights of 2,000 lbs *
|
* Truckload weights listed are approximate
** 300 lbs. per hour max. Production rates vary b incoming EPS properties and grind size. 150-250 lbs per hour typical on medium weight EPS feeds. |
|
|
|
